Connect with us

Maritime

Kongsberg delivers innovative propulsion technology to VARD for vessel newbuilds

Published

on

Kongsberg delivers innovative propulsion technology to VARD for vessel newbuilds. Image: Kongsberg
Kongsberg delivers innovative propulsion technology to VARD for vessel newbuilds. Image: Kongsberg
Listen to the story (FreightComms AudioPost)

 

The new ship-owning company Norwind Offshore will fit KONGSBERG equipment to its two new Commissioning Service Operations Vessels, to be built by VARD.

Kongsberg Maritime’s scope of delivery encompasses a combination of systems which will enable the operator to maximise operational windows whilst minimising overall energy consumption.

Key to this is the propulsion technology, which for the CSOVs will include new permanent magnet PMAZ 2600PM azimuth thrusters, PM tunnel thrusters and a retractable azimuth thruster. The return of investment is greater propulsion efficiency and manoeuvrability with reduced operational noise, lower emissions and compact dimensions.

These units are part of an environmentally-focused range of propulsion units developed by KONGSBERG over the last decade, all based on the company’s in-house PM technology. With only one rotating component in the underwater unit, low oil volume and no requirement for lubrication pumps or inboard cooling systems, PM thrusters experience reduced wear and tear and consequently deliver substantial savings in lifecycle cost. They also benefit from significant reductions in energy consumption, emissions and oil spill risk when compared with conventional azimuth thrusters, and are designed to meet stringent noise and vibration requirements, both on board the vessel and regarding emissions to sea.

“We are investing in this state-of-the-art technology from KONGSBERG in full confidence that it will pay off in the long term,” says Svein Leon Aure, CEO of Norwind Offshore. “Our operational expenditures will be considerably reduced in comparison to using conventional thrusters, and the same goes for our environmental footprint. This provides us with purpose-built vessels, designed for the future of advanced maritime operations in the offshore wind market.”

“It’s a pleasure for us to know that our high-end products perform such a central role in the contract for this new and innovative player in the offshore wind market,” adds Ottar Ristesund, SVP Sales Propulsion & Engines, Kongsberg Maritime. “We share our objectives to enable safer, more economical and greener operations at sea with both VARD and Norwind Offshore, and it will be rewarding for everyone concerned to put these principles into practice in such a direct and practical way.”

The first of the new CSOVs of VARD 4 19 design will be delivered from VARD in 2Q 2023. The second vessel is scheduled for delivery in 3Q 2024.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Container Terminal

Konecranes to deliver first hybrid RTGs to Africa

Published

on

Konecranes to deliver first hybrid RTGs to Africa. Image: Konecranes
Konecranes to deliver first hybrid RTGs to Africa. Image: Konecranes
Listen to the story (FreightComms AudioPost)

 

Konecranes has received an order from the Matadi Gateway Terminal in the Democratic Republic of the Congo for four hybrid RTGs. These will be the first hybrid RTGs operated in Africa by the Congo River in the city of Matadi. As a world first in the container handling industry, Konecranes now delivers hybrid and electric RTGs to customers as carbon neutral. Carbon emissions are minimized wherever possible in the manufacture of the cranes and the remaining emissions are compensated with re-forestation, up to the point of hand-over to the customer. This order was booked in the first quarter of 2022 and the hybrid RTGs will be delivered by March 2023.

International Container Terminal Services and La Société De Gestion Immobilière Lengo jointly run the Matadi Gateway Terminal in the Democratic Republic of the Congo. The new hybrid RTGs will enable MGT to handle increasing container traffic. “This is a breakthrough for both DR of the Congo and Africa as a whole, where container terminals are looking for ways to reduce their carbon footprints. These are their first RTGs and a big step forward in their container handling ability that will help them to reach their growth goals,” said Matti Talala, Sales Manager, Port Solutions, Konecranes. This hybrid choice of MGT is fully in line with MGT’s ongoing environmental policy.

MGT opened for business in 2014 and has since grown to reach 175,000 TEU of capacity. The new hybrid RTGs will handle containers with high eco-efficiency thanks to their hybrid drives. A hybrid Konecranes RTG is operated with electrical power from batteries and a diesel generator. During normal use, power is drawn from the batteries. During peak use, power is drawn from the batteries and diesel generator together. The hybrid RTGs for MGT will have built-in readiness for fully electric operation and they will have the smart features Auto-steering and Stack Profiling with a lifting capacity of 40t. This design and configuration will increase MGT’s capacity to 400,000 TEU by doubling the yard area.

This is part of Ecolifting, Konecranes’ continuous work to decrease the carbon footprints of our customers. From eco-optimizing diesel drives to hybridization and fully electric fleets, we will continue to do more with less.

A strong focus on customers and a commitment to business growth and continuous improvement make Konecranes a lifting industry leader. This is underpinned by investments in digitalization and technology, plus our work to make material flows more efficient with solutions that decarbonize the economy and advance circularity and safety.

Continue Reading

Maritime

Kongsberg Digital to provide vessel insight to Floatel International

Published

on

Kongsberg Digital to provide vessel insight to Floatel International. Image: Kongsberg Digital
Kongsberg Digital to provide vessel insight to Floatel International. Image: Kongsberg Digital
Listen to the story (FreightComms AudioPost)

 

Floatel International provides top-quality offshore Floatels for extreme conditions, and will now become a part of and benefit from Kongsberg Digital’s digital infrastructure Vessel Insight.

Floatel is currently operating in the North Sea region, Australia, Gulf of Mexico and Brazil and have a fleet consisting of five semi-submersible accommodation and construction support vessels. The company is systematically working to reduce its emissions and optimize its operations. As a part of Kongsberg Digital´s infrastructure Vessel Insight, the goal is to gain better control and smarter solutions through digitalization. Vessel Insight will be deployed on all of Floatel International´s operational rigs.

“We are excited to be a part of Floatel International on their digital journey. They are experts in working under extreme conditions, and we are proud they have chosen us to support them in reducing emissions and proving optimal operations through digitalization.” said Andreas Jagtøyen, Executive Vice President of Digital Ocean in Kongsberg Digital.

“One of our main focus areas is data-driven decarbonization. We hope to get the most out of apps such as Maress and will hopefully get better use of our fuel management data. With the Vessel Insight infrastructure and the Kognifai ecosystem, we have all our digital solutions in the same place and greater opportunities for further digitalization.” commented Alexander Östberg, Technical Manager at Floatel International.

Continue Reading

Intermodal Transport

RUSCON implements its multimodal service between Russia and Israel

Published

on

RUSCON implements its multimodal service between Russia and Israel. Image: Delo Group
RUSCON implements its multimodal service between Russia and Israel. Image: Delo Group
Listen to the story (FreightComms AudioPost)

 

In June 2022, a logistics operator RUSCON, successfully implemented the first shipment of 90 40-foot containers, as part of its new multimodal service between Russia and Israel. The shipment was sent by sea from Novorossiysk to the port of Ashdod. The purpose of these shipments is to link the regions of our country with the Israeli ones through the seaports of the two states.

Transportation within Russia is provided by RUSCON regular services. The consolidation points in Novorossiysk are RUSCON ‘s own terminal and the NUTEP Container Terminal. The sea transportation shoulder is fully organized by RUSCON.

Currently the frequency of calls to Novorossiysk for this service is once in two weeks. Last mile service is available to RUSCON customers in Israel.

Commenting on the new service Andrey Chernyshev, the Senior Vice-President of RUSCON, said: “Under the conditions of partial uncertainty of the situation in the world, RUSCON is doing its best not only to maintain the existing logistic chains, but also to create new ones. Undoubtedly, the launch of the new service in Israel is a significant progress in expanding the geography of RUSCON ‘s multimodal services on the Black and Mediterranean seas.”

He continued, “Such development makes it possible to offer our clients secure solutions for transportations in import-export directions. High demand for the service is evidenced by the loading of cargoes of Israeli manufacturers to Russian cargo owners already in the first call. Partaking of several Delo Group’ assets in the Russia-Israel service allows us to achieve a significant synergy effect and minimize the impact of the current negative factors”.

Continue Reading

Popular

Copyright © 2017-18 | FreightComms | Made with ♥ in Singapore